VESA patterns / 200 x 300

VESA 200 x 300 mm

A 200 x 300 pattern means four mounting holes 200 mm apart side to side and 300 mm apart top to bottom (7.9 x 11.8 in, wider than it is tall). 2 TVs on this site use it, from 50 to 55 inches, weighing 19.2 to 22.7 lb without stand.

Where it sits in the VESA standard

200 x 300 is a rectangular pattern. The standard's large-display table (Part F) lists square patterns from 200 to 1000 mm, but TV makers commonly use rectangles like this one, and wall mounts are sold by the range of patterns they accept, so it mounts like any other pattern of its size. At this size the screws are usually M6 or M8 — the TV's manual is the authority. It is the number 9 of 12 patterns among the TVs listed here.

What kind of TV uses 200 x 300

200 x 300 is the workhorse pattern of mid-size TVs: it shows up from 50 to 55 inches here. Almost every mount sold for "32 to 70-inch" or "40 to 85-inch" TVs covers it; budget mounts that stop at 300 x 300 still do.

Series using it: LG UT7550 UHD, LG UHD UA77.

Which mounts fit 200 x 300

A mount fits when the TV's pattern width and height both fall inside the mount's published range. For this pattern, the mount's largest pattern must be at least 200 wide and 300 tall, and its smallest no bigger than 200 x 300. A mount sold as "up to 400 x 400" covers it; one listed "up to 200 x 300" does not — check the minimum too, since large-TV mounts often start above 200 mm. Weight matters as much as the holes: the heaviest TV here with this pattern weighs 22.7 lb, so a mount rated below that will not do for it.

A mount that fits 200 x 300 usually also fits the smaller patterns inside it: 100 x 100, 200 x 200 — as long as its minimum allows.

TVs with a 200 x 300 pattern

By brand: LG 2. By size: 50" (1), 55" (1). Median weight 21 lb.

Standard: Wikipedia, Flat Display Mounting Interface (VESA MIS / FDMI). Models: each manufacturer's product page, checked 2026-10-20.