VESA mount patterns
The VESA pattern is the spacing of the four threaded holes on the back of a TV, in millimetres, width first. It is set by the VESA Mounting Interface Standard (MIS, formerly FDMI), and it is the one number a wall mount must match.
| Pattern (mm) | Inches | MIS part | TVs | Sizes | Weights |
|---|---|---|---|---|---|
| 100 x 100 | 3.9 x 3.9 | D | 2 | 27–32" | 7.3–7.7 lb |
| 200 x 200 | 7.9 x 7.9 | F | 27 | 32–65" | 10.3–64.6 lb |
| 200 x 300 | 7.9 x 11.8 | F-style (rectangular) | 2 | 50–55" | 19.2–22.7 lb |
| 300 x 200 | 11.8 x 7.9 | F-style (rectangular) | 23 | 43–77" | 14.1–69.2 lb |
| 400 x 200 | 15.7 x 7.9 | F-style (rectangular) | 1 | 65" | 38.2–38.2 lb |
| 300 x 300 | 11.8 x 11.8 | F | 34 | 48–77" | 24.6–84 lb |
| 400 x 300 | 15.7 x 11.8 | F-style (rectangular) | 28 | 55–85" | 37.9–82.9 lb |
| 400 x 400 | 15.7 x 15.7 | F | 23 | 65–85" | 57.1–110.9 lb |
| 600 x 400 | 23.6 x 15.7 | F-style (rectangular) | 26 | 85–100" | 70.8–152.1 lb |
| 600 x 500 | 23.6 x 19.7 | F-style (rectangular) | 4 | 85–98" | 85.8–121.2 lb |
| 1000 x 600 | 39.4 x 23.6 | F-style (rectangular) | 2 | 115" | 194–216.7 lb |
| 1000 x 700 | 39.4 x 27.6 | F-style (rectangular) | 2 | 115" | 205.7–235.3 lb |
What the standard says
- Parts B to E use M4 machine screws; Part F uses M6 or M8.
- Part F's table lists square patterns of 200, 300, 400, 500, 600, 700, 800, 900 and 1000 mm.
- The article's example: a 30-inch TV weighing more than 50 lb (23 kg) would need a Part F mount.
- Screw length is the bracket thickness plus the depth the standard allows; for Part F, M6 screws must engage at least 9 mm and at most 10 mm, in a hole no deeper than 12 mm.
Many current TVs use rectangular patterns such as 300 x 200, 400 x 300 and 600 x 400 mm, outside the square Part F table. Wall mounts are sold by the range of patterns they fit, so what matters is that both the width and the height of your TV's pattern fall inside the mount's range. That is visible in the table: 77 of the TVs listed use 300 x 200, 400 x 300 or 600 x 400.
Smaller patterns
| Part | Pattern (mm, W x H) | Screws | Typical use |
|---|---|---|---|
| B | 50 x 20 | M4 | Small displays |
| C | 75 x 35 | M4 | Small displays |
| D | 75 x 75 | M4 | Monitors and small TVs |
| D | 100 x 100 | M4 | Monitors and small TVs |
| E | 200 x 100 | M4 | Mid-size displays (listed as 100 x 200 mm, 2 x 3 holes) |
| F | 200 x 200 | M6 or M8 | Large displays: square patterns from 200 to 1000 mm in the standard |
Don't know your pattern? Look up the model or measure it.
Standard: Wikipedia, Flat Display Mounting Interface (VESA MIS / FDMI). TV counts: manufacturer product pages, checked 2026-10-20.